Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | GE Fanuc |
| Model | IC693DNM200 |
| Product Type | DeviceNet Master Module |
| PLC Platform | Series 90-30 |
| Communication Protocol | DeviceNet |
| Supported Baud Rates | 125, 250, 500 kbaud |
| Maximum Connected Devices | Up to 63 other devices |
| Backplane Current Consumption | 450 mA at 5 VDC, typical |
| DeviceNet Network Current | 50 mA at 24 VDC, typical; 80 mA peak |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Configuration Software | Proficy Machine Edition / Logic Developer PLC, with compatible DeviceNet support |
Specifications are based on GE Fanuc’s DeviceNet module documentation.
Product Introduction (Anti-Template)
Operating as the DeviceNet master interface for the GE Fanuc Series 90-30 PLC platform, the IC693DNM200 coordinates cyclic I/O data exchange and explicit messaging with connected field devices. It supports standard DeviceNet communication rates of 125, 250, and 500 kbaud and can communicate with up to 63 other network devices.
For replacement projects, matching the part number alone is not enough. Confirm the installed CPU, PLC firmware, configuration software, network baud rate, and slave-device settings before commissioning. Honestly, checking the existing configuration first can save hours of troubleshooting after a module swap.
IC693DNM200
IC693DNM200
IC693DNM200
IC693DNM200
IC693DNM200
QC, Procurement & Logistics SOP
- Inbound Verification: Check the IC693DNM200 part number, product label, revision markings, and physical condition. Verify the supplied module against the customer’s required configuration.
- Live Rig Testing: Confirm available test coverage before ordering. Where compatible equipment is available, perform applicable power-up and communication checks; confirm DeviceNet network settings and connected-device communication.
- QA & Anti-Static Packaging: Inspect the housing and connectors, document the item’s condition, and use appropriate ESD-protective packaging for shipment.
- Global Logistics & Export Compliance: Confirm the shipping destination, required commercial documents, packaging method, and applicable customs classification before dispatch. Air and sea freight options can be discussed according to the order.
Technical Pitfalls & Integration Warnings
- Firmware Revision Mismatch: The IC693DNM200 requires compatible Series 90-30 CPU firmware and programming software. For example, an older CPU firmware revision may not support a configuration created in a newer engineering environment. Verify compatibility before installation.
- DIP Switch / Configuration Errors: Do not assume that the replacement will automatically inherit the existing network configuration. Check the DeviceNet node settings, baud rate, scan configuration, and PLC application parameters. Confirm any hardware-specific switch settings against the applicable manual.
- Wiring and Terminal Incompatibility: Verify the DeviceNet connector pinout, CAN_H/CAN_L polarity, shield connection, network power, and termination arrangement. Incorrect wiring or missing termination can cause intermittent communication or prevent the network from starting.
- ESD Damage During Unboxing: Electrostatic discharge can damage electronic components without leaving visible marks. Use a grounded ESD workstation and suitable protective packaging when handling the module. Avoid touching exposed circuit-board contacts.
Frequently Asked Questions (FAQ)
Q1: What is the primary function of the GE Fanuc IC693DNM200?
It acts as a DeviceNet master communication module for the Series 90-30 PLC, supporting I/O data exchange and explicit messaging with connected network devices.
Q2: How many DeviceNet devices can it communicate with?
The module supports communication with up to 63 other devices. Actual network performance depends on the configuration, baud rate, and connected-device requirements.
Q3: Is the IC693DNM200 compatible with every Series 90-30 CPU?
No. GE Fanuc documentation identifies CPU compatibility restrictions, including the IC693CPU321 and IC693CPU340. CPU firmware and configuration-software requirements must also be checked before ordering.
Q4: Can I replace the module without stopping the PLC?
Do not assume that hot replacement is supported in your application. Replacing a communication module may interrupt network data exchange or affect machine operation. Follow the equipment manufacturer’s procedures and the site’s shutdown and isolation requirements.
Q5: What is the usual international delivery lead time?
Lead time depends on stock status, condition, inspection requirements, and destination. Confirm availability and the estimated dispatch date before placing an order.
Q6: Can you arrange international shipping and customs documents?
Shipping options and export documentation can be discussed based on the destination and order requirements. Final freight costs, delivery estimates, and document requirements should be confirmed before dispatch.
Q7: Is the backward-compatible with another DeviceNet module?
Compatibility should not be assumed from the protocol alone. Confirm the exact catalog number, PLC platform, firmware, configuration software, and network requirements. A module with a similar description may have different installation or compatibility restrictions.
