Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Product Introduction
When a critical industrial process control system loses all digital output control to safety-critical field actuators mid-operation, the root cause almost always traces back to a non-redundant standard digital output module that cannot maintain continuous operation after a single internal component failure.
Purpose-built for Allen-Bradley 1715 redundant I/O systems, this 8-channel DC digital output module supports high-side sourcing output configuration, natively compatible with standard industrial 18-32V DC field devices. It draws only 165mA backplane current at 18-32V DC, with maximum system power dissipation capped at 3.0W to minimize heat buildup inside the control cabinet. The built-in slew rate limiting function restricts field voltage rise rate to 150V/s, drastically reducing EMI emission and protecting downstream field devices from voltage transients. It features full basic isolation up to 50V continuous, and supports DIN rail mounting with IP20 ingress protection for deployment in standard industrial control cabinet environments.
1715-OB8DE
Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Model | 1715-OB8DE |
| Compatible Platforms | Allen-Bradley 1715 Redundant I/O System |
| Total Output Channels | 8 independent DC digital output channels |
| Output Voltage Range | 18–32 V DC |
| Per Channel Continuous Current | 0.5 A @ 18–32 V DC |
| Backplane Current Draw | 165 mA @ 18–32 V DC |
| Max System Power Dissipation | 3.0 W |
| Field Voltage Slew Rate Limit | 150 V/s |
| De-energized Output Voltage Slew | 12 V/ms (safety diagnostic enabled) |
| Energized Output Current Slew | 0.9 A/ms |
| Continuous Isolation Voltage | 50 V (basic insulation) |
| Mounting Form | DIN Rail Mounted |
| Ingress Protection Rating | IP20 |
| Operating Temperature Range | -25°C to +70°C |
| Agency Approvals | CE, UL, CCC industrial certified |
| Lifecycle Status | ACTIVE (current production) |
Field Application & Technical Pitfalls
This part runs three non-negotiable production-critical roles.
First, it acts as the core redundant digital output unit for large chemical plant safety control systems, delivering continuous reliable control for critical process solenoid valves and emergency shutdown actuators.
Second, it serves as the field output interface for power plant distributed control systems, connecting the redundant PLC controller to all motor control center (MCC) start/stop relay coils.
Third, it functions as the high-reliability output module for high-speed packaging line automation systems, maintaining stable control for high-cycle pneumatic actuators without unexpected dropout.
⚠️ Per Channel Current Overload Risk: Each channel is only rated for 0.5A continuous output. If you connect a field solenoid that draws more than 0.5A continuous current directly to the channel, you will trigger the built-in overcurrent protection and potentially damage the output driver circuit.
⚠️ Slew Rate Configuration Mismatch: The default 150V/s slew rate limit can be adjusted under specific conditions. If you disable the slew rate limiting function without proper EMI mitigation, you will trigger severe conducted EMI that interferes with adjacent analog signal wiring.
⚠️ Backplane Power Budget Overrun: The module draws 165mA from the 1715 redundant I/O backplane. If you install too many high-power modules on the same backplane, you will exceed the total backplane power budget and cause the entire I/O rack to lose power.
I watched a senior automation tech skip the per-channel current rating check last summer. He connected a 1A rated industrial solenoid directly to this 1715-OB8DE channel, and the output driver burned out after 10 minutes of continuous operation. The team spent 1.5 hours troubleshooting before they found the overcurrent issue. That 1-minute oversight forced the process loop to run on limited manual operation for half a shift.
Quality Control (QC) SOP & Transparency
- Inbound Verification: Cross-check the OEM serial number against Rockwell Automation’s official 1715 I/O part revision database, run anti-counterfeit validation on the module’s laser-etched serial label, and confirm no cracked output terminal blocks or damaged backplane connectors.
- Live Rig Testing: Mount the module in a certified 1715 redundant I/O test rack, connect 8 simulated 0.5A DC load devices, and verify 4 hours of stable continuous full-load output operation.
- Parameter Testing: Confirm 0.5A per channel current stability, verify 150V/s slew rate limiting performance, and validate all 8 channels switch correctly without any unexpected dropout.
- Final QA & Packaging: Seal the fully tested module in a static-shielding anti-static bag, apply a unique QC passed serial label, and pack it in ESD-dissipative foam with a printed hard copy of the full output performance test report.
Frequently Asked Questions
- Can I hot-swap this module while the 1715 redundant I/O rack is powered on? Yes, it supports certified hot-plug operation. The redundant I/O system will automatically switch to the backup output path to maintain continuous field device control during the swap.
- What exact Allen-Bradley systems does this part work with? It is fully compatible with Allen-Bradley 1715 redundant I/O platforms. It will not establish native stable communication with older non-redundant 1771 or 1756 standard I/O systems.
- How long is the standard warranty for this new surplus unit? It carries a full 12-month functional warranty. If it fails within that window under specified operating conditions, we cover all return shipping and bench replacement costs.
- How do I tell a genuine OEM unit apart from a refurbished clone? Genuine units have the Allen-Bradley hologram sticker on the side of the PCB, and the output driver chip carries the official Rockwell Automation part number marking. Refurbished clones usually skip the official hologram and use generic lower-rated driver chips that cannot deliver the rated 0.5A per channel continuous performance.
- Will this 1715-OB8DE directly replace an older 1715 series digital output module? No. Older 1715 output variants may have different firmware versions. You will need to re-verify all output channel configuration and safety diagnostic settings in the RSLogix 5000 engineering software after swapping.
- What’s the maximum safe continuous operating temperature at full 8-channel load? It will hold stable output performance up to 70°C, though your mileage may vary if the control cabinet cooling airflow drops below 15 CFM and internal output driver temperatures spike 15°C above ambient.
