Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Form Factor | 6U single-slot VME64x |
| Processor | MPC7457 PowerPC, 1GHz, AltiVec coprocessor |
| Cache | 32KB L1 I / 32KB L1 D, 512KB L2, 2MB L3 |
| Main Memory | 512MB soldered ECC SDRAM, expandable to 1GB |
| Flash Storage | 32MB primary + 8MB auxiliary soldered NOR flash |
| Expansion | Dual 64-bit 33/66MHz PCI buses, dual PMC sites |
| Network Interfaces | 1×Gigabit Ethernet, 1×10/100BASE-TX Ethernet |
| Serial Ports | 2×RS232 front panel ports |
| VME Interface | Universe II VME bridge, VME64 compatible |
| Operating Temperature | 0°C to +70°C commercial grade |
| Firmware | MOTLoad, supports VxWorks and Linux OS |
| Compliance | RoHS compliant |
Product Introduction
The Motorola MVME55006E-0163 is a 6U VME64x single board computer built around the MPC7457 PowerPC processor. It occupies one VME slot and serves as the main processing node for legacy VME-based embedded systems.
This board retains VMEbus backward compatibility while adding higher memory bandwidth and vector processing via AltiVec. It supports dual PMC mezzanine cards so engineers can add custom I/O without modifying the VME chassis backplane.
MVME55006E-0163
MVME55006E-0163
MVME55006E-0163
MVME55006E-0163
MVME55006E-0163
Application Scenarios & Field Experience
Part 1 (Narrative Paragraph)
Many legacy VME control systems still run on older MVME51xx and MVME2700 boards. Hardware failures force unexpected shutdowns, and direct drop-in replacements are hard to source. The MVME55006E-0163 preserves existing VME rack infrastructure while delivering extra compute headroom for updated signal processing logic.
Part 2 (Numbered List)
- Power generation: Turbine control and high-speed data acquisition in gas turbine monitoring racks
- Industrial simulation: Aerospace training simulators running real-time kinematic calculations
- Medical imaging: Front-end data processing for CT and MRI scanning equipment
- Oil & gas: Offshore platform control cabinets with VME-based safety subsystems
Part 3 (Short Field Story)
A power plant’s VME turbine controller lost its main SBC mid-shift. The original MVME5100 board had no available stock. We supplied an MVME55006E-0163, and the engineering team migrated the existing MOTLoad firmware image. The rack powered up on the first test cycle, and the unit returned to service within 12 hours. No backplane or wiring changes were required.
Standard Operating Procedure (SOP) for Quality Control
- Visual & Origin Inspection: Check OEM labeling, board serial numbers, anti-counterfeit markers, and PCB condition for scratches or solder damage. Confirm original packaging seals for new surplus inventory.
- Live Rig Testing: Install board into a 6U VME test chassis, apply rated VME supply voltages, and run power-on self-test. Validate VME bus handshake and both Ethernet ports.
- Firmware Verification: Boot MOTLoad, read and record firmware revision, and confirm memory and flash size match the datasheet values.
- ESD-Safe Packaging: Clean board contacts, place in anti-static tray, seal with ESD bag, and add rigid outer carton for transit protection.
Frequently Asked Questions (FAQ)
Q1: Is the MVME55006E-0163 compatible with older MVME51xx VME racks? A: It works in standard VME64 backplanes used for MVME51xx hardware. Verify your chassis power budget before installation; higher processor load may require power supply review.
Q2: What warranty do you provide for this unit? A: We offer a 12-month warranty. The warranty covers hardware defects found during normal operation. Physical damage, incorrect voltage application, or unauthorized firmware edits void coverage.
Q3: What is the current stock and shipping timeline? A: We maintain limited new surplus inventory. Units ship within 3 business days after order confirmation. Larger quantities require lead time; confirm stock status before locking in project schedules.
Q4: Can I load an older MOTLoad firmware version onto this board? A: Firmware downgrade is possible, but mismatched firmware can cause flash partitioning or memory detection errors. Always back up the current firmware before writing new images.
Q5: Can I insert or remove this board while the VME crate remains powered? A: This model is not hot-swappable. Removing or inserting the board with power active can damage the VME bridge and adjacent modules. Fully cut chassis power before board replacement.
