Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Model Number | 146031-01 |
| Product Family | 3500 Series |
| Compatible Main Module | 3500/22M Transient Data Interface |
| Product Type | Ethernet I/O Module |
| Ethernet Interface | 10Base-T / 100Base-TX |
| Network Standard | IEEE 802.3 |
| Ethernet Detection | Autosensing |
| Connector Type | RJ45 |
| Maximum Cable Length | 100 m (328 ft) |
| Communication Protocol | BN Host and BN TDI over TCP/IP |
| Network Medium | Copper twisted-pair Ethernet |
| Installation Position | Full-height rear I/O slot |
| Operating Temperature | -30°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 95%, non-condensing |
| Approximate Weight | 0.4 kg |
| System Application | Machinery Condition Monitoring |
Note: Specifications should be checked against the applicable 3500/22M documentation and exact hardware revision.
Product Introduction (Anti-Template)
Operating as the Ethernet I/O interface for the Bently Nevada 3500/22M Transient Data Interface, the 146031-01 provides copper network connectivity between the 3500 machinery protection rack and compatible host systems. It supports autosensing 10Base-T/100Base-TX communication through an RJ45 connector, using BN Host and BN TDI protocols over TCP/IP.
The module plays an important role in transferring machinery monitoring information to Bently Nevada System 1 condition monitoring software and 3500 configuration software. For maintenance teams operating installed 3500 systems, the 146031-01 is a relevant replacement component when the original Ethernet interface fails. Before ordering, verify the TDI model, rear I/O configuration, and network connection requirements.
146031-01
146031-01
146031-01
146031-01
146031-01
QC, Procurement & Logistics SOP
- Inbound Verification
- Verify the complete part number: 146031-01.
- Inspect the identification label, housing, and rear connectors.
- Check the RJ45 interface for damaged pins, contamination, or mechanical wear.
- Confirm compatibility with the installed 3500/22M TDI configuration.
- Live Rig Testing
- Inspect the module and perform appropriate electrical checks.
- Where a compatible 3500/22M test rack is available, verify module recognition and Ethernet link operation.
- Test communication using a suitable network setup and compatible host software.
- Check data transmission and status diagnostics where the complete system configuration permits.
- Record the actual testing scope and results before shipment.
- QA & Anti-Static Packaging
- Handle the module with appropriate ESD protection.
- Protect the RJ45 connector and electrical contacts during handling.
- Use antistatic packaging and protective cushioning.
- Record the verified model, condition, and inspection status.
- Global Logistics & Export Compliance
- Confirm destination, delivery terms, and shipping documentation.
- Apply the appropriate customs classification based on the product’s technical characteristics and destination-country regulations.
- Use secure packaging for international air or sea freight.
- Provide shipment tracking after dispatch.
Technical Pitfalls & Integration Warnings
1. Confusing the Ethernet I/O Module with the Complete TDI
The 146031-01 is the rear Ethernet I/O module associated with the 3500/22M Transient Data Interface. It is not the complete TDI assembly. If the customer’s requirement is for a complete 3500/22M, confirm whether both the main TDI module and the corresponding rear I/O module are required.
2. Ethernet Cable and Network Compatibility
The 146031-01 uses copper Ethernet with an RJ45 connector and supports 10Base-T/100Base-TX communication. Use suitable shielded Category 5 cabling and keep the Ethernet segment within the documented 100 m limit. Incorrect cable termination, damaged connectors, or network configuration problems can prevent communication.
3. Rack Configuration and RIM I/O Compatibility
The 146031-01 must be installed in the appropriate rear I/O position paired with the 3500/22M TDI. The manufacturer documentation warns that the existing 3500/20 Rack Interface Module I/O must be removed before installing the TDI I/O and TDI configuration. Do not mix incompatible rear I/O assemblies. Verify the rack arrangement before replacement.
4. ESD and Configuration Precautions
Electrostatic discharge can damage electronic components during handling. Use ESD-safe procedures when removing or installing the module. After replacement, verify Ethernet link status, IP communication, and data transfer. Also check the relevant controller and host software configuration. Follow the approved maintenance procedure rather than assuming hot swapping is supported.
Frequently Asked Questions (FAQ)
Q1: What is the Bently Nevada 146031-01 used for?
The 146031-01 is an Ethernet I/O module for the 3500/22M Transient Data Interface. It provides the copper Ethernet connection used to transfer machinery monitoring information to compatible host systems.
Q2: What is the difference between 146031-01 and 3500/22M?
The 3500/22M is the Transient Data Interface system module, while 146031-01 is its associated rear Ethernet I/O module. They are related components but are not the same product.
Q3: What Ethernet interface does the 146031-01 support?
It supports autosensing 10Base-T and 100Base-TX copper Ethernet through an RJ45 connector, based on the IEEE 802.3 standard.
Q4: What is the maximum Ethernet cable length?
The documented maximum copper Ethernet segment length is 100 meters (328 feet). Use suitable network cabling and verify the installation requirements before commissioning.
Q5: Which software systems work with the 146031-01?
The 3500/22M TDI architecture connects the 3500 monitoring system with compatible Bently Nevada System 1 Condition Monitoring and Diagnostic Software and 3500 System Configuration Software.
Q6: Can the 146031-01 replace the original 3500/20 RIM I/O?
No. The 146031-01 is the Ethernet I/O module associated with the 3500/22M TDI. The existing RIM I/O arrangement must be reviewed before TDI installation. Follow the manufacturer’s documented rack replacement procedure.
Q7: What information should I provide when requesting a quotation?
Please provide the complete part number 146031-01, required quantity, destination country, and preferred condition. A photo of the existing module label and installed rear I/O arrangement will help confirm the correct replacement.
