Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Display | 10.4 inch TFT color, 640 × 480 VGA |
| Touch Type | Infrared touch, non-reflective safety glass |
| Color Depth | 256 or 65536 colors, software selectable |
| Processor | 32-bit RISC, 400 MHz |
| Memory | 64 MB DRAM, 1.5 MB flash, 32 kB NVRAM |
| Operating System | Windows CE |
| Interfaces | 100Base-TX Ethernet, RS232, MPI/Profibus, 2×USB Host, USB Device, CAN |
| Storage | Dual CompactFlash card slots |
| Supply | 24 V DC SELV, typical 24 W |
| Front Rating | IP65; rear IP20 |
| Operating Temperature | 0 °C to +55 °C |
| PLC Function | Optional, enabled via separate software license |
Product Introduction
The Eaton XVS-440-10MPI-1-10 is a panel-mount XVS400 operator interface built for machine-level visualization. It uses infrared touch hardware and natively supports MPI and Profibus links for direct PLC communication. It accepts CompactFlash media for project backup and runtime logging. The optional IEC 61131-3 PLC license lets it run standalone control logic without a separate external controller.
XVS-440-10MPI-1-10
XVS-440-10MPI-1-10
XVS-440-10MPI-1-10
XVS-440-10MPI-1-10
XVS-440-10MPI-1-10
Application Scenarios & Field Experience
Many machine retrofits run older PLCs that only expose MPI ports. Generic HMIs often require extra protocol converters, adding points of failure. This panel connects directly over MPI, which keeps the cabinet layout simpler and cuts communication latency.
- Packaging machinery: Line status display, recipe selection and fault reset for continuous wrappers.
- Material handling conveyors: Local operator control, speed setpoint and fault alarm logging.
- Plastic injection molding machines: Mold recipe storage, cycle monitoring and alarm acknowledgment.
- Water treatment skids: Pump status, valve control and local flow setpoint adjustment.
In my experience, a packaging line had an XVS-440-10MPI-1-10 fail after repeated condensation on the rear connector assembly. The technician loaded the saved HMI project from CompactFlash to the replacement unit, verified MPI handshake to the controller, and cycled all local commands. The line returned to production within 30 minutes, and they added a small cabinet heater to control humidity.
Standard Operating Procedure (SOP) for Quality Control
- Visual & Origin Inspection: Check stainless steel front frame, touch glass, rear connectors, and OEM labels. Reject units with scratched infrared touch surfaces or bent pin headers.
- Live Rig Testing: Apply 24 V DC supply, boot to runtime, verify touch response, Ethernet link, and MPI communication handshake. Test CompactFlash read/write.
- Firmware & Image Verification: Record Windows CE image version and bootloader revision. Confirm compatibility with the target Galileo project version.
- ESD-Safe Packaging: Cover rear connectors, place inside static shielding bag, add foam padding around the front panel to prevent glass damage.
Frequently Asked Questions (FAQ)
Q1: Can XVS-440-10MPI-1-10 communicate with S7-300 and S7-400 controllers over MPI? A: Yes, the MPI port works directly with these controllers. Confirm baud rate and station address match the PLC hardware configuration. Q2: What warranty applies to this Eaton XVS-440-10MPI-1-10? A: We offer a 12-month warranty. Warranty covers hardware defects under rated operating conditions. Damage from condensation, cracked touch glass, or incorrect OS image flashes is excluded. Q3: Is this exact XVS-440-10MPI-1-10 variant stocked? A: This is a legacy HMI variant. Stock availability changes regularly. Confirm lead time before scheduling machine downtime. MPI versions are not interchangeable with pure Ethernet XVS400 models. Q4: Can I enable PLC logic on this panel after installation? A: The PLC runtime is not built in by default. You must purchase and apply the matching license key to activate IEC 61131-3 control functions. Q5: Can I hot-disconnect the MPI cable while the panel runs? A: You may disconnect the MPI cable, but loss of communication triggers alarm states on the HMI. Unplanned disconnection can freeze setpoint writes and stop command acknowledgment.
