Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Product Introduction
When a complex process control system needs sub-1ms scan cycle performance to avoid unplanned trips, this CPU delivers the processing power to keep your entire operation stable.
It slots directly into the dedicated CPU slot of IC698CHS009A and other RX7i chassis, supporting both front panel and DIN rail installation options. Its rugged industrial design is built for continuous 24/7 operation in heavy manufacturing, power generation and process plant environments .
IC698CRE030-DE sideview
Key Technical Specifications
| Parameter | Value |
|---|---|
| Processor | 1.8GHz Dual-Core Industrial CPU |
| User Memory | 64MB onboard non-volatile RAM |
| Backplane Bandwidth | 2.1 Gbps full-speed communication |
| Analog I/O Support | 4-20mA / 0-10V signal compatible |
| User Adjustable Setpoints | Min (4mA/0V), Max (20mA/10V), Speed (10-120s) |
| Operating Temperature Range | 0°C ~ 60°C |
| Installation Options | Front panel mount / DIN rail mount |
| Power Rating Options | 20/60/170/300 Watt configurable |
| Override Mode | DIP switch configurable manual override behavior |
| Application Compatibility | PLC, DCS, process control, manufacturing automation |
IC698CRE030-DE front
Field Application & Technical Pitfalls
Critical Industrial Scenarios
- Large DCS Process Control Systems: Acts as the main controller for refinery and chemical plant distributed control loops, coordinating hundreds of analog and digital I/O points.
- Power Generation Turbine Control: Executes high-speed turbine protection and regulation logic for steam and gas turbine systems in power plants.
- High-Speed Motion Control Lines: Manages multi-axis motion control logic for automotive assembly and high-throughput packaging production lines.
Non-Negotiable Technical Pitfalls
- ⚠️ Bold Warning 1: Never set the speed setpoint below 10 seconds. The third DIP switch from the left will trigger an unexpected fast ramp that can cause connected process actuators to overshoot their safe travel limits.
- ⚠️ Bold Warning 2: Firmware revision mismatch will disable 30% of the CPU’s advanced functions. This unit requires Proficy Machine Edition v9.5+; it will not support full dual-core performance on older v8.x programming software.
- ⚠️ Bold Warning 3: Skipping the 10-minute post-installation setpoint calibration will leave you with uncaught 4-20mA signal scaling errors. The CPU will not flag the offset until you run a full closed-loop process test.
A chemical plant maintenance team once swapped a IC698CRE030-DE CPU and skipped the full setpoint calibration. The 4-20mA output had a 12% scaling offset that caused a reactor temperature overshoot, triggering a safety interlock shutdown that lasted 3 hours and cost an estimated $15,000 in lost production.
IC698CRE030-DE front
Quality Control (QC) SOP & Transparency
- Inbound Verification: Cross-check the OEM serial number against GE Fanuc’s official part registry, inspect the anti-counterfeit hologram, and confirm no bent pins on the high-density backplane connector.
- Live Rig Testing: Seat the unit in a calibrated RX7i test chassis, apply system power, and confirm full backplane communication and logic execution stability for 2 continuous hours.
- Parameter Testing: Verify 4-20mA and 0-10V setpoint accuracy stays within ±0.2% of rated values, confirm 1.8GHz dual-core processor runs at full rated speed under 100% logic load, and validate all DIP switch override modes function correctly.
- Final QA & Packaging: Seal the tested module in a static-shielding anti-static bag, attach a unique QC passed serial label, and nest it in foam padding inside a rigid industrial shipping carton.
IC698CRE030-DE backside
Frequently Asked Questions (FAQ)
- Can I hot-swap this CPU while the RX7i system is powered on? No. You must first place the system in program mode and disable all safety interlocks before removing the unit to avoid unintended field device state changes.
- What exact GE systems is this CPU compatible with? It works natively with all GE PACSystem RX7i series chassis and I/O modules. It will not operate in older Series 90-70 PLC racks without a custom adapter kit.
- How long is the standard warranty for this new surplus unit? 12 months from delivery. It covers all manufacturing defects, but does not extend to units damaged by overvoltage, misconfiguration, or ESD in the field.
- How do I tell a genuine OEM unit apart from a refurbished clone? Genuine GE IC698CRE030-DE units have a laser-etched part number on the side housing, not a printed sticker. Clone units almost always fail the 4-20mA setpoint accuracy test.
- What is the typical lead time for shipment? In-stock units ship within 48 hours. If you require official GE factory calibration documentation, add 2 extra business days to the turnaround window.
- Can this CPU replace the older IC698CRE020 RX7i processor? Well, technically it fits the same chassis slot, but you will need to recompile your full control logic in Proficy Machine Edition v9.5+ to unlock the full dual-core performance.
Pre:GE IC698CPE020-CC | RX7i 700 MHz CPU Module
Next:
