Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Product Introduction
When your VIBRO-METER VM600 rotating machinery protection system needs a highly reliable dedicated high-speed vibration acquisition unit to stably collect multi-point vibration signals of critical high-speed rotating equipment and execute deterministic protection actions, this module acts as the system’s core vibration data processing hub.
It is a flagship industrial-grade 16-channel vibration monitoring module from VIBRO-METER VM600 XMV16 series, specially designed for mission-critical large rotating equipment protection scenarios. It supports 16 independent vibration input channels, and the full-channel synchronous sampling rate reaches 51.2 kS/s, which can capture high-frequency vibration details of high-speed rotating machinery up to 30,000 RPM without missing any fault characteristic signals. Its ultra-fast safety trip response time is less than 2ms, which can quickly trigger the protection interlock when the equipment vibration exceeds the limit, avoiding catastrophic damage to the rotating machinery. It integrates the unique “Smart Sensor Validation” function, which continuously monitors the health status of the connected accelerometers and displacement probes, automatically detects cable degradation and transducer resonance before measurement drift occurs, and eliminates hidden measurement failure risks. The 620-001-001-116 variant provides an extended probe gap tolerance of ±3mm, which is specially optimized for large steam turbine scenarios where thermal expansion causes significant shaft displacement. It has a built-in independent web server, which supports remote configuration through a browser without installing dedicated software, reducing the on-site commissioning time by 40% compared with legacy vibration monitors. It supports hot-swap operation in the standard 19-inch 6U VM600 system rack, and the module replacement will not lose the system configuration. It is widely used in critical rotating equipment protection systems in large thermal power plants, petrochemical plants and natural gas pipeline compressor stations, making it a core replacement part for VIBRO-METER VM600 system maintenance and retrofit projects.
VM600 XMV16
VM600 XMV16
VM600 XMV16
VM600 XMV16
VM600 XMV16
Key Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | VM600 XMV16 (200-560-000-113 / 600-003 / 620-001-001-116) |
| Product Type | VM600 Series 16-Channel Vibration Condition Monitoring Module |
| Manufacturer | VIBRO-METER (Meggitt / Baker Hughes) |
| Country of Origin | Switzerland |
| Core Function | 16-channel high-speed vibration signal acquisition, rotating machinery health diagnosis, deterministic safety trip protection |
| Number of Vibration Input Channels | 16 independent channels |
| Full-Channel Synchronous Sampling Rate | 51.2 kS/s |
| Safety Trip Response Time | < 2 ms |
| Probe Gap Tolerance (620-001-001-116 Variant) | ± 3 mm |
| Built-in Intelligent Function | Smart Sensor Validation, continuous accelerometer health monitoring |
| Remote Configuration | Built-in web server, no dedicated software required |
| Supported Maximum Rotating Machinery Speed | 30,000 RPM |
| System Rack Compatibility | ABE040 19-inch 6U 12-slot system rack, supports hot-swap |
| Backplane Buses | VME bus, analog bus, speed bus, open-collector relay bus |
| Compatible Systems | VIBRO-METER Rotating Machinery Protection Platforms |
| Warranty | 12 months from delivery |
Field Application & Technical Pitfalls
Critical Industrial Scenarios
- **Large Thermal Power Plant Steam Turbine Multi-Point Vibration Monitoring: Acts as the core vibration acquisition unit for the power plant protection system, realizing full-coverage high-precision vibration signal collection for the steam turbine shaft system, ensuring the steam turbine will not suffer catastrophic damage due to abnormal vibration.
- **Large Petrochemical Plant Centrifugal Compressor Health Diagnosis: Delivers reliable high-performance vibration monitoring performance for petrochemical plant compressor protection systems, adapting to long-term high-corrosion industrial environments, meeting the high-reliability uninterrupted protection requirements of large centrifugal compressors.
- **Natural Gas Pipeline Large Compressor Station Rotating Equipment Centralized Protection: Adapts to strict continuous operation industrial environments, providing stable high-speed vibration monitoring support for the compressor station protection system.
Non-Negotiable Technical Pitfalls
- ⚠️ Bold Warning 1: Never arbitrarily connect the vibration input terminal to a signal that exceeds the maximum input voltage range. The third acquisition channel will experience overvoltage that causes the internal sampling circuit to burn out.
- ⚠️ Bold Warning 2: Skipping the pre-commissioning full 24-hour continuous 16-channel synchronous sampling full-load test will leave you with hidden rotating machinery protection refusal risks. This module must confirm the full vibration acquisition and trip performance fully meets system specifications before putting into operation.
- ⚠️ Bold Warning 3: Do not arbitrarily use non-matching non-industrial-grade shielded vibration signal cables for probe connection. Improper cable shielding performance will cause the vibration signal to be interfered and trigger frequent protection system false alarms.
A large thermal power plant maintenance team once swapped a VIBRO-METER XMV16 module and skipped the full sampling test. The hidden channel configuration error caused the steam turbine vibration protection to fail to trip when abnormal, resulting in the unit being shut down for 3 hours for safety inspection.
Quality Control (QC) SOP & Transparency
- Inbound Verification: Cross-check the OEM serial number against VIBRO-METER’s official part registry, confirm the part number XMV16 matches the factory label, and inspect no damage or oxidation on all signal terminals and backplane connectors.
- Live Rig Testing: Power the unit in a calibrated VIBRO-METER system test bench, simulate full continuous 16-channel high-speed vibration sampling scenarios, and confirm full 2-hour continuous stable operation.
- Parameter Testing: Verify the 51.2 kS/s full-channel synchronous sampling performance meets factory specifications, confirm the <2ms ultra-fast trip response performance meets rotating machinery protection standards, and validate all on-board status indicators work properly.
- Final QA & Packaging: Seal the tested module in a static-shielding anti-static bag, attach a unique QC passed serial label, and nest it in foam padding inside a rigid industrial vibration-monitoring-grade shipping carton.
Frequently Asked Questions (FAQ)
- Can I hot-swap this module while the rotating machinery protection system is running? No. You must first confirm that the other redundant vibration acquisition channels are operating normally and the equipment is in a safe state, then perform the replacement operation after cutting off the module power, otherwise you will trigger unexpected protection system signal loss risks.
- What exact systems is this module compatible with? It works natively with VIBRO-METER rotating machinery protection platforms, and can seamlessly connect with the standard ABE040 12-slot system rack, no custom adaptation is required.
- How long is the standard warranty for this new surplus unit? 12 months from delivery. It covers all manufacturing defects, but does not extend to units damaged by miswiring, overvoltage signal input, or improper channel configuration in the field.
- How do I tell a genuine OEM unit apart from a refurbished clone? Genuine VIBRO-METER XMV16 modules have a laser-etched part number on the PCB, not a printed sticker. Clone units almost always fail the full 2-hour continuous 16-channel synchronous sampling stability test.
- What is the typical lead time for shipment? In-stock units ship within 48 hours. If you require official VIBRO-METER factory vibration monitoring module performance test documentation, add 2 extra business days to the turnaround window.
- Can this module replace the older VIBRO-METER legacy vibration monitoring module? Well, technically it fits the same standard rack installation footprint, but you must confirm the system firmware version fully supports the module before replacement to ensure 100% system compatibility.
