Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
3. Key Technical Specifications
| Parameter | Value |
|---|---|
| Product Designation | CR-GEN0-M6400R3 |
| Camera Family | DALSA Genie |
| Sensor Type | Monochrome (CCD/CMOS family depending on exact variant) |
| Interface | Gigabit Ethernet (GigE Vision) |
| Lens Mount | C-mount (typical for Genie series) |
| Triggering | Software and hardware trigger |
| Key Technology | Trigger-to-Image Reliability framework |
| Software Support | DALSA Sapera LT + CamExpert |
| Power | 12–24 V DC (typical for Genie) |
| Primary Application | Industrial inspection, machine vision, quality control |
4. Product Introduction (Anti-Template)
The CR-GEN0-M6400R3 belongs to Teledyne DALSA’s Genie family of industrial digital cameras. These cameras were designed as affordable, easy-to-integrate GigE Vision devices for machine vision applications. They combine standard Gigabit Ethernet connectivity with DALSA’s Trigger-to-Image Reliability framework to ensure dependable image capture and transfer from the camera to the host computer.
Genie cameras are configured and controlled using Sapera LT software and the CamExpert utility. This hardware-independent approach allows OEMs to deploy the same application code across different DALSA acquisition hardware. The CR-GEN0-M6400R3 is used in automated inspection, defect detection, measurement, and other industrial imaging tasks where reliable triggering and consistent image delivery are required. Note that many Genie models have been discontinued by the manufacturer and are now supplied through surplus channels.
CR-GEN0-M6400R3
CR-GEN0-M6400R3
CR-GEN0-M6400R3
5. QC, Procurement & Logistics SOP
- Inbound Verification – Confirm full model number (CR-GEN0-M6400R3), lens mount condition, Ethernet connector, and any firmware or revision labels. Photograph all identifiers.
- Live Rig Testing – Connect via GigE, power the camera, verify detection in CamExpert or equivalent software, and confirm basic image acquisition and trigger response.
- QA & Packaging – After functional inspection, protect the sensor window and connectors, clean the housing, and pack in anti-static protective packaging with desiccant.
- Global Logistics & Export Compliance – Classify under the correct HS code for industrial digital cameras. Packaging must protect the optical window and electronics; export documentation is prepared to minimize customs delays.
6. Technical Pitfalls & Integration Warnings
Network Configuration – GigE Vision cameras require proper network settings (Jumbo frames, IP configuration, sufficient bandwidth). Incorrect settings cause dropped packets or failed acquisition.
Trigger Timing – Reliable operation depends on correct trigger setup within the Trigger-to-Image Reliability framework. Poor triggering leads to missed or incomplete images.
Lens and Illumination – Image quality is highly dependent on proper C-mount lens selection and lighting. Mismatched optics or lighting will degrade inspection performance.
Software Version – Use a compatible version of Sapera LT / CamExpert. Older or newer software releases may have compatibility limitations with specific Genie firmware.
7. Frequently Asked Questions (FAQ)
What is the realistic global lead time for a verified CR-GEN0-M6400R3?
As a discontinued Genie series camera, availability depends on surplus stock. Typical lead time after verification is 5–15 business days plus standard air freight.
What series does the CR-GEN0-M6400R3 belong to?
Teledyne DALSA Genie series of industrial GigE Vision cameras.
What interface does it use?
Gigabit Ethernet (GigE Vision).
What software is used to configure it?
DALSA Sapera LT with CamExpert.
Is it still in production?
Many Genie models, including variants of this type, have been discontinued by Teledyne DALSA and are now available primarily as surplus or refurbished units.
What are typical applications?
Industrial machine vision tasks such as defect detection, dimensional measurement, barcode/OCR, and automated quality inspection.
What should be confirmed before ordering a replacement?
Exact model number, required resolution/sensor type, lens mount, and compatibility with the existing Sapera LT software environment.
