Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Key Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ABB |
| Model | PFTL 201C |
| Order Number | 3BSE007913R0010 |
| Product Type | Pressductor pillow block load cell |
| Measurement Direction | Horizontal force |
| Nominal Load | 10 kN (approximately 2,250 lbf) |
| Extended Load | 15 kN (approximately 3,375 lbf) |
| Overload Capacity | Up to 100 kN in the measurement direction, according to ABB’s published data |
| Accuracy Class | 0.5% |
| Repeatability Error | Less than ±0.05% |
| Deflection at Nominal Load | 0.010 mm |
| Spring Constant | 1,000 kN/mm |
| Operating Principle | Electromagnetic Pressductor technology |
| Working Temperature Range | -10°C to +90°C |
| Electrical Connection | Connector for a pluggable connection cable |
Specifications are based on ABB’s published PFTL201 product data. The PFTL 201C family includes multiple rated-load variants; confirm the 10 kN rating for the exact part number before ordering.
Product Introduction (Anti-Template)
Operating as part of ABB’s Pressductor force-measurement system, the PFTL 201C (3BSE007913R0010) is a pillow block load cell designed to measure horizontal force in industrial strip-processing applications. Its magnetoelastic measurement principle detects changes in magnetic properties under mechanical stress, producing a measurement signal without relying on substantial physical deformation of the sensing element. ABB specifies a 10 kN nominal load and a 0.5% accuracy class for the corresponding rated version.
The sensor is commonly applied to tension measurement in rolling mills and continuous-material processing lines. Correct mechanical installation is essential: the load cell must be aligned with the intended force direction, mounted on a suitable foundation, and matched to the bearing housing and adapter arrangement. Honestly, a mechanically compatible replacement matters just as much as the model number; incorrect alignment can compromise measurement accuracy even when the sensor itself is functioning correctly.
PFTL 201C
PFTL 201C
PFTL 201C
PFTL 201C
PFTL 201C
QC, Procurement & Logistics SOP
- Inbound Verification: Check the ABB nameplate, PFTL 201C designation, order number, rated-load marking, connector, and housing condition. Record available serial-number and traceability information.
- Live Rig Testing: Where suitable equipment is available, inspect the sensor and verify its output using an appropriate test setup. Confirm the test method and results before purchase; a complete installed-system calibration should not be assumed.
- QA & Anti-Static Packaging: Protect the connector and cable interface against impact, contamination, and moisture. Use suitable protective packaging and secure cushioning during transport.
- Global Logistics & Export Compliance: Confirm the destination, required shipping documents, and applicable HS classification before dispatch. Arrange suitable air or sea freight packaging and provide shipment tracking when available.
Technical Pitfalls & Integration Warnings
- Firmware or Controller Revision Mismatch: The load cell is a force transducer, not a standalone PLC module with user-managed firmware. However, the associated tension electronics may have configuration or revision requirements. For example, a hypothetical controller change from V2.8 to V3.1 should trigger a compatibility check rather than an assumption of direct interchangeability.
- DIP Switch and System Configuration: Do not assume the load cell itself uses DIP switches. Check the associated tension electronics and control-system settings, including calibration, scaling, and signal configuration, before commissioning a replacement.
- Mechanical Mounting and Wiring Compatibility: Verify the nominal load, measurement direction, bearing housing, mounting dimensions, connector type, and cable arrangement. ABB specifies mounting-surface flatness within 0.05 mm and alignment requirements for PFTL 201C/CE installations. Incorrect mounting or force direction can affect readings and may damage the installation.
- ESD and Connector Handling: Although the sensor is primarily a force-measurement device, its connector and associated electronics still require careful handling. Avoid contaminating or damaging connector contacts, and follow the applicable ESD precautions when working with connected measurement electronics.
Frequently Asked Questions (FAQ)
Q1: What is the main function of the ABB PFTL 201C?
It measures horizontal force and is used in applications such as strip-tension measurement in rolling mills and continuous-material processing lines.
Q2: What is the rated load of 3BSE007913R0010?
The corresponding version is specified at 10 kN nominal load, with a 15 kN extended load. Verify the nameplate and required capacity before ordering.
Q3: Is the PFTL 201C a complete tension controller?
No. It is a load cell that measures force. A compatible tension-measurement controller or electronics unit is normally used to process the signal and integrate it into the control system.
Q4: Can this load cell be replaced while the machine is running?
Do not assume live replacement is possible. The sensor is part of a mechanical force-measurement arrangement. Follow the machine’s isolation procedure, relieve relevant mechanical loads where required, and consult the equipment documentation before removal.
Q5: Is the PFTL 201C compatible with every PFTL201 variant?
Not automatically. The PFTL201 family includes different rated loads and connection configurations. Confirm nominal capacity, mounting dimensions, connector type, and the exact part number before substitution.
Q6: What is the typical international delivery time?
Delivery depends on stock confirmation, inspection requirements, destination, and shipping method. Request a confirmed lead time with the quotation.
Q7: Which shipping and customs documents can be provided?
Available documentation depends on the destination and transaction requirements. Confirm the commercial invoice, packing list, tracking details, and any requested certificate documentation before dispatch.
