Description
Note: Many products are not yet listed. Please contact us for more product information. Our supply channels are constantly expanding, and we currently have 20 stable shared supply channels. Please confirm the model, product, price, and all other necessary information with customer service before placing an order. We offer new, refurbished, and used products, and prices are adjusted according to the year of the item you require.
Key Technical Specifications
| Parameter | Value |
|---|---|
| Display | 10.4-inch Color TFT LCD |
| Native Resolution | 800 × 600 (SVGA) |
| Input Type | Resistive touch screen + dedicated function keys |
| Rated Supply Voltage | 24 V DC, 20–30 V DC operating range |
| Front Panel Rating | IP66 / NEMA 4X |
| Rear Enclosure Rating | IP20 |
| Communication | 10/100 Ethernet, RS232, RS422/RS485 |
| Peripheral Ports | USB Host, USB Device, CompactFlash slot |
| Compatible System | ABB 800xA, Compact Product Suite |
| Operating Temperature | 0 °C to +55 °C (vertical mounting) |
| Net Weight | 4.1 kg |
Product Introduction
This ABB PP846 is a Panel 800 operator panel built for local HMI access on 800xA and Compact Product Suite control systems. It runs graphic displays, alarm queues, trend views and recipe management for on-site operators.
In my experience, the integrated physical function keys set this model apart from smaller touch-only panels. Operators can trigger critical commands without navigating layered touch menus, which reduces input delay during upset conditions.
PP846
PP846
PP846
PP846
PP846
Application Scenarios & Field Experience
This panel addresses the risk of single-point failure when remote SCADA workstations lose connection. Heavy dust, washdown and high-vibration areas need a sealed local interface that stays available for manual intervention.
- Mining & mineral processing: Crusher control cabinet HMI for feeder speed adjustment and fault reset
- Food & beverage: CIP skid operator station for wash cycle selection and valve sequence control
- Oil & gas auxiliary systems: Fuel gas conditioning skid interface for pressure setpoint adjustment
- Pulp and paper: Stock preparation cabinet HMI for consistency trim and alarm acknowledgment
I handled a site replacement last year where a PP846 failed after repeated high-pressure washdown breached the front seal. The AC800M controller kept running, but operators could not start or pause the CIP sequence locally. We shipped this replacement unit, the technician swapped it and loaded the existing CF card project file. Full local control returned within 30 minutes.
Standard Operating Procedure (SOP) for Quality Control
- Visual & Origin Inspection: Inspect OEM labeling, housing seal condition, serial number matching and anti-counterfeit marker verification.
- Live Rig Testing: Apply 24 V DC power, confirm boot sequence, test touch response, function key actuation and Ethernet serial handshakes against an ABB controller.
- Firmware Verification: Capture and log the exact firmware revision shown on the boot screen and attach this record to the unit’s test report.
- ESD-Safe Packaging: Seal the panel inside static-dissipative bag, add foam edge protection, pack into rigid carton with humidity indicator card.
Frequently Asked Questions (FAQ)
Q1: What control systems work with the ABB PP846 3BSE042238R1? A: It is built for ABB 800xA and Compact Product Suite paired with AC800M controllers. Always match HMI firmware to the controller firmware; mismatched versions can block tag access and alarm rendering.
Q2: What warranty applies to this unit? A: We offer a 12-month warranty from shipping date. The warranty covers internal hardware defects under rated operating conditions; washdown damage, incorrect wiring or cracked touchscreen voids coverage.
Q3: Can this panel ship the same business day after order confirmation? A: If marked in stock, we can complete QC and hand over to carrier the same business day. Confirm stock status before locking in a shutdown timeline around delivery.
Q4: What risks come with firmware mismatch after installation? A: Do not force an existing project download if firmware revisions do not align. You can either flash the panel firmware to match the controller or rebuild the project for the panel’s current revision. Forced mismatched loading can corrupt internal storage.
Q5: Can I swap this panel while the controller stays online? A: The panel itself is not hot-swappable hardware, but the controller logic continues running during removal. You lose all local operator visibility and key functions during the swap. Schedule the change during low-risk windows; do not perform it while running critical batch sequences.
