GE IS210MACCH1AKH — the Multi Application Converter Controller (MACC) board from GE’s 1.5 MW wind turbine platform — is now available from our Dubai stock with tested units ready for immediate dispatch across the MENA region. For asset owners running legacy GE 1.5sle and 1.5xle fleets, a failed MACC board is the difference between a turbine that earns and a turbine that stands still. The GE IS210MACCH1AKH ends that wait.
نظرة عامة: لوحة GE IS210MACCH1AKH هي وحدة تحكم محوّل متعددة التطبيقات (MACC) لتوربينات الرياح من فئة 1.5 ميغاواط، متوفرة الآن في مخزوننا بدبي مع شحن سريع إلى منطقة الشرق الأوسط وشمال أفريقيا.
What the GE IS210MACCH1AKH Does
Inside a GE 1.5 MW wind turbine, the converter is what allows a variable-speed rotor to deliver grid-compliant power at a fixed frequency. The MACC — Multi Application Converter Controller — is the control intelligence that sits at the centre of that converter, coordinating the power electronics against the turbine controller’s commands.
When a MACC board fails, the converter faults out and the turbine trips offline. There is no partial-capacity workaround. That is why this specific part number carries operational weight far out of proportion to its physical size.
The GE IS210MACCH1AKH is a later hardware revision within the H1A family of MACC boards, carrying the GE cross-reference 104W4658P001.
Part Number Decode | فك رموز رقم القطعة
Understanding GE’s Mark VI/VIe nomenclature protects you from ordering the wrong revision:
| Segment | Meaning |
|---|---|
| IS210 | Board-level assembly (populated PCB with hardware), as opposed to IS200 bare-board designations |
| MACC | Multi Application Converter Controller function code |
| H1 | Hardware group / functional version |
| A | Artwork revision |
| KH | Firmware / build and conformal-coating revision code |
Known siblings in the same family: IS210MACCH1AAA · ACB · ACC · AEF · AEG · AFG · AGG · AJH · AKH · and IS210MACCH2AEG / H2AGG.
Critical: These suffixes are not freely interchangeable. Compatibility depends on your converter build, firmware level and turbine software version. Send us your existing board’s full label — including the revision sticker — and our engineers will confirm fitment in writing before you commit to a purchase order.
Key Specifications
| Parameter | GE IS210MACCH1AKH |
|---|---|
| Manufacturer | General Electric / GE Energy (now GE Vernova) |
| Product family | Mark VI / Mark VIe wind turbine control platform |
| Function | Multi Application Converter Controller (MACC) |
| Application platform | GE 1.5 MW wind turbine series (1.5s / 1.5sle / 1.5xle) |
| GE cross-reference | 104W4658P001 |
| Form factor | Printed circuit board assembly, converter cabinet mounted |
| Protection | Conformal-coated for humidity, dust and salt-air exposure |
| Environmental design | Rated for nacelle/tower-base duty: vibration, thermal cycling, EMI |
| Lifecycle status | Legacy / obsolescence-managed — supplied as tested surplus or professionally refurbished |
Core Competitive Advantages
1. Availability is the product. The GE 1.5 MW platform is a legacy fleet. OEM channels for boards at this vintage are constrained, and quoted lead times of 8–20 weeks are common. We hold in physical stock in Dubai. For a turbine losing revenue every day it is down, availability outranks every other specification.
2. Every unit is functionally tested before it ships. We do not sell “as-removed, untested” boards as if they were serviceable spares. Each GE is inspected, powered up and functionally verified, and is supplied with a test record.
3. Revision-matched to your fleet. Our engineering team cross-checks your converter build and firmware level against the board revision before dispatch. This single step prevents the most expensive failure mode in the legacy-spares market: a board that arrives on time, fits mechanically, and still will not commission.
4. Obsolescence management, not one-off trading. We can advise on the full MACC family, identify viable alternate revisions, and support repair-and-return of your existing failed board as a lower-cost route where the fault is economically repairable.
5. Twelve-month replacement warranty. Backed in writing, with a documented RMA process — not a verbal assurance over WhatsApp.
6. Dubai as your MENA logistics hub. Jebel Ali clearance, full commercial documentation and certificate of conformity, and air-freight reach into Egypt, Jordan, Morocco, Turkey, Pakistan and East Africa — the regions where the GE 1.5 MW fleet is heavily installed.
Typical Applications
- GE 1.5sle and 1.5xle wind turbine converter cabinets
- Wind farm O&M spare-parts inventories and critical-spare kits
- Repowering and life-extension programmes on legacy GE fleets
- Independent service providers (ISPs) maintaining out-of-warranty GE assets
- Masdar, EWEC and regional IPP wind portfolios across MENA
Availability, Warranty and Support
متوفر في المخزون — شحن سريع من دبي إلى الشرق الأوسط وشمال أفريقيا.
Stock units of the are held in Dubai. Delivery within the UAE is typically next working day; Saudi Arabia, Qatar, Oman, Kuwait and Bahrain within 3–5 working days; wider MENA destinations by express air freight. All shipments include a commercial invoice and certificate of conformity suitable for customs clearance, and every unit carries a 12-month replacement warranty.
Frequently Asked Questions
What does MACC stand for on the GE ? Multi Application Converter Controller. It is the converter control board used on GE’s 1.5 MW wind turbine platform.
Is the GE a Mark VI or Mark VIe part? It belongs to GE’s Mark VI/VIe wind turbine control family. Some suppliers list it under Mark V or under general industrial automation — that is incorrect and is a useful signal to check the supplier’s technical depth.
Can I use IS210MACCH1AFG or AGG instead of AKH? Sometimes, but never assume it. Revision compatibility depends on your converter hardware build and firmware. Send us your board label and we will confirm in writing.
Is this part still manufactured by GE? The 1.5 MW platform is a legacy fleet and boards at this vintage are supplied through the surplus and refurbished channel rather than new OEM production. This is normal for wind assets of this generation and is precisely why obsolescence-managed sourcing matters.
Do you offer repair of a failed MACC board? Yes. Where the fault is economically repairable, repair-and-return is often faster and cheaper than sourcing a replacement. Contact us with the fault symptoms and board label.
Request a Quotation | اطلب عرض سعر
Send us the full part number, the revision suffix on the board label, your turbine model and your converter build, and our team will respond with confirmed availability, revision compatibility and pricing within one business day.
Technical note: Function, family and cross-reference details are compiled from GE wind converter component references and industry repair-channel documentation. GE has not published a public datasheet for this board. Configuration, revision compatibility and lifecycle status must be confirmed against your own turbine documentation or GE Vernova before ordering.
